How To Take A PS4 Apart
Sony has recently introduced the latest version of its PS4 game console, which has undergone significant changes. If you are curious about the internal components and want to explore the inside of the PS4, you can follow the steps below to disassemble it. However, it is important to note that disassembling the PS4 should be done at your own risk, and any damage caused during the process will not be the responsibility of the guide provider.
Unboxing the CUH-1200A
The first step in disassembling the PS4 involves removing the hard drive cover, which can be done by sliding it off. Once the cover is removed, you will find a single screw that needs to be taken out to slide the hard drive out. For this step, you will require a PH 0 screwdriver. Additionally, you will need to peel off the warranty stickers to reveal two black T9 security torx screws, which should be removed. It is worth noting that the CUH 1200 model has only two screws holding the plastics on, as opposed to the four screws in the previous models.
Removing the Top Cover
To remove the top cover, you should start by removing the two screws securing it to the PS4. Then, grab underneath the top cover near the power button and pull up. Repeat this action on the opposite side of the top cover. Once both sides are pulled up, the top cover should slide back and off the PS4. Upon removing the top cover, you will notice that the motherboard is much smaller, and the APU clamp has been completely redesigned, making the inside of this model significantly different from previous models.
Removing the Bottom Cover
To remove the bottom cover, you will need to exert force on each side of the cover near the back of the console. You may use opening tools to pry it off if necessary. Once the bottom cover is removed, you will get a view of the components on the underside of the console, including a redesigned power supply and optical drive.
Removing the Power Supply
After removing the bottom plastic, you will find the physical eject button that Sony has decided to use in this model. This change is speculated to help prevent the “random ejecting” of discs that was an issue in the previous models. To remove the power supply, you will need to remove the three T9 torx screws and the two phillips PH 0 long screws. Then, carefully disconnect the four wire connector from the motherboard before removing the power supply.
Disconnecting Cables
After removing the power supply, you will need to disconnect the WiFi antenna cable and the wide optical drive cable. The wide optical drive cable has a black “collar” that needs to be lifted up on each side to free the cable. It is important to exercise caution while disconnecting these cables to avoid any damage.
Frequently Asked Questions (FAQs)
1. Is it safe to disassemble my PS4?
Disassembling your PS4 should be done at your own risk. It is important to follow a reliable guide and take necessary precautions to avoid any damage to the console.
2. What tools are required to disassemble a PS4?
You will need a PH 0 screwdriver, opening tools, mini pliers, and T9 torx screws to disassemble a PS4.
3. Why should I disassemble my PS4?
Disassembling a PS4 can be done for various reasons, such as cleaning the internal components, replacing parts, or gaining a better understanding of the console’s hardware.
4. Can I reassemble my PS4 after disassembling it?
Yes, if you have followed the disassembly process carefully and kept track of the components, you can reassemble your PS4 using the reverse of the disassembly steps.
5. Will disassembling my PS4 void the warranty?
Yes, disassembling your PS4 will void the warranty provided by the manufacturer. It is advisable to consider the warranty implications before deciding to disassemble the console.
6. Are there any risks involved in disassembling a PS4?
Disassembling a PS4 carries the risk of damaging internal components, voiding the warranty, and rendering the console inoperable if not done carefully. It is essential to proceed with caution and at your own risk.